Moon P8 Vorverstärker / Simaudio

 

2-Teilige Referenz Vorstufe Moon P8 vom kanadischen Hersteller Simaudio. Das Netzteil alleine wiegt mehr als die meisten Endstufen, eine Verarbeitung par excellence, made in Kanada. Hervorragende Testergebnisse wie auch Award-Gewinner untermauern das edle Erscheinungsbild.

Die Simaudio Moon P8 ist maximal 100Std. gelaufen und befindet sich in neuwertigem Zustand. Originalverpackung, Metallfernbedienung und Zubehör vorhanden.

 

6.000,00 €

  • verfügbar
  • 3 - 5 Tage Lieferzeit1

 

Weiterführende Informationen:

 

Description: Solid-state, two-channel, two-chassis preamplifier. Inputs: 3 pairs balanced (XLR), 4 pairs single-ended (RCA). Outputs: 2 pairs balanced (XLR), 2 pairs unbalanced (RCA, fixed and variable). Tape input/output loops: 1 pair unbalanced (RCA). Input impedance: 11k ohms. Output impedance: 50 ohms. Voltage gain: 9dB. Frequency response: 5Hz–100kHz, +0/–0.1dB. IM distortion: unmeasurable. THD: <0.002%, 20Hz–20kHz. Signal/noise ratio: 130dB, 20Hz–20kHz, ref. full output. Maximum output: 12V balanced, 6V unbalanced.

Dimensions: Preamplifier: 18.75" (480mm) W by 4" (100mm) H by 16.5" (420mm) D. Controller: 18.75" (480mm) W by 5.5" (140mm) H by 16.5" (420mm) D. Weight: 74 lbs (33kg).

 

2-chassis design with one chassis housing the power supply, digital controller circuitry and software processing. The other chassis contains the audio circuitry

A dual-mono oversized power supply using 2 toroidal transformers in conjunction with 6 stages of DC voltage regulation and extensive choke filtering

M-Ray volume control based on the R-2R resistor array configuration using metal film surface mount resistors with 0.1% tolerances, resulting in no sonic degradation of the audio signal, regardless of the selected volume setting

Fully differential, no global feedback circuit topology, using absolutely no capacitors anywhere in the audio signal path

 Power supply voltage regulation includes i²DCf (Independent Inductive DC Filtering); There is one inductor dedicated to each integrated circuit type component (DAC, Op-Amp, etc.) in the audio circuit's signal path; 40 stages in all

 530 individual volume steps in 1dB and 0.5dB increments

 M-Lock for "user selectable" maximum volume setting lock-out for each line input

 "Gain offset" for each individual line input with a ±10dB range

 Each line input is fully configurable to be "home-theater ready", where the gain section of the P-8

  is bypassed

 RS-232 port for (i) full unsolicited bidirectional feedback and (ii) firmware updates

 IR input for external control

 12 Volt trigger output for remote operation

SimLink™ controller port for 2-way communications with other compatible MOON components

4-Layer printed circuit boards with pure copper tracings for a much shorter signal path;

  This results in greater sonic accuracy and a dramatically improved signal-to-noise ratio

Ultra rigid chassis construction to minimize the effects of external vibrations

Accurate matching of the very finest quality electronic components in a symmetrical circuit design

Includes FRM-2 remote control.